Primer universal sira 1l

Synthetic resin-based primer for cast iron and steel with high filling capacity, which can also be applied as a thick layer. It has very good adhesion and active corrosion protection. This primer is heat-resistant, does not contain chromates and lead, it can be painted with paints and treated electrostatically.

Pluses
- Good coverage
- Saving time
- Provides a long service life

Use a hardener to speed up drying time
It can be stored outdoors for up to 5 days without a finish coating

User Guide/Painting Tip:
It is important to mix the contents well before use to get the correct color.
When painting large objects, we recommend mixing all the required paint in one go to prevent color variation.
It is preferable to apply the paint using a conventional sprayer, compressed or airless spray equipment, although a brush or roller can also be used.
When spraying the primer on synthetic resin, it must be diluted by 10–15% with a solvent. When using with
paint can be applied undiluted with a brush or roller.
If you need a faster drying time, we recommend using a quick hardener thinner instead of synthetic.
resin thinner.
If you want to apply a second layer, it should be applied wet on wet, preferably one layer horizontally and one layer vertically. If not, you will need to wait at least 24 hours (at 20°C) and then lightly sand the surface before
applying the second layer.
To achieve the best results, it is important to thoroughly clean the surface beforehand, apply a primer
color that best matches the final paint color and use thinner. If you need to process plastic or non-ferrous metals,
it is necessary to use a primer for zinc.
If the composition of the existing paint layer is unknown or based on conventional binders, we recommend painting a test area before starting work

Your Name:

Advantages:

Недостатки:

Your Review

Note: HTML is not translated!

Evaluate the publication:

Send your feedback